Nortel CallPilot 201i Installation And Configuration Manual page 130

Performing hardware maintenance and mechanical assembly
6 Detach the hard drive bracket by removing the two screws on the bottom
of the hard drive assembly.
7 Remove the power and data cables from the hard drive.
8 Continue with "To install the hard drive" below.
To install the hard drive
1 If you are replacing the hard drive with a new one, do the following:
a. Attach the hard drive bracket to the new hard drive.
b. Attach the power and data cables to the new hard drive.
130
Standard 1.0
G101449
CallPilot