Interpreting The Mpc Slot Leds - Nortel CallPilot 201i Installation And Configuration Manual

October 2002

Interpreting the MPC slot LEDs

Introduction
There is an LED for each MPC slot on the 201i server.
MPC slot LED functions
The LEDs indicate two possible MPC slot states:
The MPC is in use.
It is safe to remove the MPC from the server.
MPC slot LED indications
IF the MPC slot LED
is off
is on
was off, then came on
was on, then went off
Part 5: 201i Server Maintenance and Diagnostics
Troubleshooting your CallPilot system
THEN
the MPC is not receiving power.
It is safe to remove the MPC from the
server.
the MPC is in use.
It is not safe to remove the MPC from the
server.
the MPC was recognized by the 201i
software and subsequently powered up.
the MPC was successfully disabled using
the Maintenance page in CallPilot Manager.
It is safe to remove the MPC from the
server.
23