Interpreting The Network And Drive Activity Leds - Nortel CallPilot 201i Installation And Configuration Manual

Troubleshooting your CallPilot system
Interpreting the network and drive activity
LEDs
Introduction
The 201i server provides four LEDs to indicate ELAN, CLAN, SCSI device,
and IDE hard drive activity. They are labeled as follows:
LED label
E
C
I
S
Network LED states
IF the E or C
LEDs are
off
24
Description
ELAN
CLAN
IDE hard drive
SCSI device (CD-ROM or tape drive)
THEN
a valid hardware connection with the network has
not been established.
Ensure that the cable is connected to the
respective network hub. If the cable is connected,
ensure that the cable is good.
Standard 1.0
CallPilot