Overview - Nortel CallPilot 201i Installation And Configuration Manual

Using CallPilot system utilities

Overview

Introduction
The following table lists the CallPilot system utilities:
Utility
Diagnostics Tool
PEP Maintenance
System Monitor
Accessing the system utilities
All CallPilot utilities are accessible from the CallPilot server in the Start
Programs
106
Description
Allows CallPilot startup diagnostics to be enabled
or disabled (turned on or off).
Displays a list of installed PEPs and enables PEP
uninstall.
Displays the following information:
the status of all CallPilot channels
the status of all CallPilot services
Note: This status is more accurate than the status
that Windows NT provides in the Services
control panel.
particulars about the CallPilot System, such as
names, keycodes, serial numbers, IP addresses,
and system numbers
CallPilot System Utilities menu.
Standard 1.0
CallPilot