Nortel CallPilot 201i Installation And Configuration Manual page 61

October 2002
Parameter
-c
-n
-R
-r
-S
-s
interval
To run the nbtstat command from Windows NT 4.0
1 Click Start
command prompt window.
Result: The MS-DOS Command Prompt window appears.
2 At the MS-DOS prompt, type nbtstat with the required parameters.
Part 5: 201i Server Maintenance and Diagnostics
Description
Lists the contents of the NetBIOS name cache giving the
IP address of each name.
Lists local NetBIOS names. Registered indicates that the
name is registered by broadcast (Bnode) or WINS (other
node types).
Reloads the LMHOSTS file after purging all names from
the NetBIOS name cache.
Lists name resolution statistics for Windows networking
name resolution. On a Windows NT computer configured
to use WINS, this option returns the number of names
resolved and registered through broadcast or through
WINS.
Displays both client and server sessions, listing the remote
hosts by IP address only.
Displays both client and server sessions, and attempts to
convert the remote host IP address to a name using the
HOSTS file.
Displays selected statistics, pausing interval seconds
between each display. Press Ctrl+C to stop displaying
statistics. Without this parameter, nbtstat prints the current
configuration information once.
Programs Command Prompt to display the MS-DOS
Using Windows NT online diagnostic tools
61