Figure 9. Detailed Status Screen; Figure 10. Loopback And Test Commands Screen - ADTRAN T200 H2TU-R Installation And Maintenance Manual

The Detailed Status selection from the Span Status
Menu, illustrated in Figure 9, displays the HDSL2
and T1 status for each receiver point. From this
screen, all registers can be zeroed (which requires
confirmation), and min/max can be reset.
CIRCUIT ID:
MARGIN(CUR/MIN/MAX): 08/00/10
LINE CODE:
ES-P/ES-L:
SES-P/SES-L:
UAS-P/UAS-L:
CIRCUIT ID:
61222026L1-5A
Press ESC to return to previous menu
Detailed HDSL2 and T1 Status
HDSL2 RECEIVER DATA
H2TU-C
--------
ATTEN(CUR/MAX): 29/93
ES 15MIN:
SES 15MIN:
UAS 15MIN:
T1 RECEIVER DATA
DSX-1
------
FRAMING: AUTO
B8ZS
000/001
000/001
000/000
ALARMS: NONE

Figure 9. Detailed Status Screen

Press ESC to return to previous menu
Loopback and Test Commands
______
|H2TUC |
<------|
|
NET |
|
------>|
DSX-1 |______|
1. Run Self Tests
2. H2TU-C Loopup Network
3. H2TU-C Loopup Customer
4. H2TU-R Loopup Network
5. H2TU-R Loopup Customer
Selection:

Figure 10. Loopback and Test Commands Screen

61222026L1-5, Issue 1
Figure 10 illustrates the Loopback and Test
Commands Screen, which provides the user with the
ability to evoke or terminate all available HDSL2
loopbacks. It also provides a self-test option to
perform a self-diagnostic of the H2TU-C and
H2TU-R. Each HSDL2 circuit component can be
looped toward the network or customer from this
screen.
H2TU-R
--------
11/00/12
29/29
010 000
000 000
041 814
DS1
-------
AUTO
B8ZS
000/008
000/008
822/000
NONE
______
|H2TUR |
| | |------>
| | |
|<--------->| |
| | |
| | |<------
|______|
01/01/00 00:04:53
1. Zero Registers
2. Restart Min/Max
Selection:
01/01/00 00:05:12
CUST
DS1
9