Table of Contents
Advertisement
Dell EMC PowerEdge R450 system overview
The PowerEdge R450 system is a 1U server that supports:
rd
● Up to two 3
Generation Intel Xeon Scalable processors with up to 24 cores
● 16 DIMM slots
● Two redundant AC or DC power supply units
● 4 x 3.5-inch chip SATA (hard drive or SSD) drives.
● 4 x 3.5-inch hot-swappable SAS, SATA (hard drive or SSD) drives.
● 8 x 2.5-inch SAS, SATA (hard drive or SSD) drives.
For more information about supported drives, see the
NOTE:
All instances of SAS, SATA drives are seen as drives in this document, unless specified otherwise.
NOTE:
For more information, see the Dell EMC PowerEdge R450 Technical Specifications on the product documentation
page.
Topics:
•
Front view of the system
•
Rear view of the system
•
Inside the system
•
Locating the Express Service Code and Service Tag
•
System information label
•
Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of 4 x 3.5-inch drive system
Table 1. Features available on the front of the system
Item
Ports, panels, and
slots
1
Left control panel
8
Dell EMC PowerEdge R450 system overview
www.dell.com/poweredgemanuals
Icon
Description
N/A
Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
● Status LED: Enables you to identify any failed hardware
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
section.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the Status LED indicators section.
system. The Quick Sync feature is optional. This feature
2
Advertisement
Table of Contents
