Table of Contents
Advertisement
Table 2. Features available on the front of the system (continued)
Item
Ports, panels, and
slots
2
Drive slots
3
Optical drive (optional)
4
Right control panel
5
Information tag
Left control panel view
Figure 4. Left control panel without optional iDRAC Quick Sync 2.0 indicator
Figure 5. Left control panel with optional iDRAC Quick Sync 2.0 indicator
10
Dell EMC PowerEdge R540 overview
Icon
N/A
N/A
N/A
N/A
Description
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. The Quick Sync feature is optional. This feature
enables management of the system by using mobile devices.
This feature aggregates hardware or firmware inventory
and various system level diagnostic and error information
that can be used in troubleshooting the system. For
more information, see the Integrated Dell Remote Access
Controller User's Guide at www.dell.com/idracmanuals.
Enable you to install drives that are supported on your system.
For more information, see the Dell EMC PowerEdge R540
Technical Specifications on the product documentation page.
One optional slim SATA DVD-ROM drive or DVD+/-RW drive.
Contains the power button, USB ports, iDRAC Direct (Micro-AB
USB), VGA port.
The Information Tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address,
and so on. If you have opted for the secure default access
to iDRAC, the Information tag also contains the iDRAC secure
default password.
Status LED indicators
section.
Advertisement
Table of Contents
