Table of Contents
Advertisement
Installation Guide Linear Rotary Motors
4 Installation Instructions
4.1 Operating Conditions
Maximum ambient temperature limits:
•
-10 °C...80 °C
Internal temperature sensor error occurs at:
•
90 °C
Max. installation altitude
•
The max. installation altitude is 4'000 m above sea level.
From 1'000 m, derating of 1 °C per 100 m is to be considered for air cooling.
4.2 Installation Options
The PR02 linear motors have a centric fit (technical data in the chapter "Dimensions") on the front so that an
exact alignment of the rotary axis is possible.
Mounting only via the front screws is generally not sufficient (vibrations, transverse load) and must be
supplemented by another support. For reasons of vibration, a support as far back as possible is preferable.
See the installation examples in the following chapter. To ensure that the motor is not installed in the
machine with tension, tolerance compensation (see next chapter) must be provided. The detailed mounting
dimensions can be found in chapter 10 "Dimensions". The corresponding CAD files are available in the
LinMot eCatalogue
https://shop.linmot.com/
4.2.1 Horizontal Installation
Ordering Information
Item
Nut N8/M4
Nut N8/M6
Page 12 / 48
The PR02 linear rotary motor can be mounted horizontally using the
T-slots at the bottom.
T-nuts (M4 / M5 / M6) can be used for fastening.
Description
Nut for 8 mm T-slots with M4 thread
Nut for 8 mm T-slots with M6 thread
PR02-52
ENG
Item-No.
0150-2189
0150-2558
NTI AG / LinMot
Advertisement
Table of Contents
