Table of Contents
Advertisement
Installation Guide Linear Rotary Motors
3.9 Option angled Motor Connector (R01)
In order to offer the user an even shorter installation length, linear rotary motors of the PR02-38 family are
optionally available with a motor angle connector. Since this option is only a mechanical variant, the function
of the motor remains the same.
•
Further information can be found in the drawings in chapter 10.
•
PR02-38 linear rotary motors with the angled motor connector are only available on
request.
4 Installation Instructions
4.1 Operating Conditions
Maximum ambient temperature limits:
•
-10 °C...80 °C
Internal temperature sensor error occurs at:
•
90 °C
Max. installation altitude
•
The max. installation altitude is 4'000 m above sea level.
From 1'000 m, derating of 1 °C per 100 m is to be considered for air cooling.
4.2 Installation Options
The PR02 linear motors have a centric fit (technical data in the chapter "Dimensions") on the front so that an
exact alignment of the rotary axis is possible.
Mounting only via the front screws is generally not sufficient (vibrations, transverse load) and must be
supplemented by another support. For reasons of vibration, a support as far back as possible is preferable.
See the installation examples in the following chapter. To ensure that the motor is not installed in the
machine with tension, tolerance compensation (see next chapter) must be provided. The detailed mounting
dimensions can be found in chapter 10 "Dimensions". The corresponding CAD files are available in the
LinMot eCatalogue
https://shop.linmot.com/
4.2.1 Horizontal Installation
Ordering Information
Item
Nut N6/M4
Page 10 / 39
The PR02 linear rotary motor can be mounted horizontally using the
T-slots at the bottom.
T-nuts (M4) can be used for fastening.
Description
Nut for 6 mm T-slots with M4 thread
PR02-38
ENG
Item-No.
0150-4383
NTI AG / LinMot
Advertisement
Table of Contents
