Installation Instructions; Operating Conditions; Instructions For Installing The Linear Motor - LinMot P10-70-SSC Series Installation Manual

Installation Guide Linear Motors

3 Installation instructions

Operating conditions

•
Maximum ambient temperature limits are 10 °C...80 °C.
•
Internal temperature sensor error occurs at 90 °C.
•
The linear motor should not be operated under water.

Instructions for installing the linear motor

Please attend to the safety instructions in chapter 2 during the assembling!
NTI AG / LinMot P10-70-SSC / P10-70-SSC-D02
Install the mounting flange at the front.
Install the mounting flange at the rear.
Clean the slider with a paper towel.
ENG
Page 7 / 32