LAIA TP-100 Administrator's Manual page 57

 Upgrade from http server: The terminal will obtain the upgrade file from the
specified server and automatically upgrade it.
 Upgrade from USB storage: The terminal automatically detects the new version in
the USB flash drive and performs differential upgrade.
 Upgrade from USB storage
Simply copy the software version to the USB flash drive, insert the USB flash drive
into the USB port of the terminal, and follow the prompts to complete the upgrade.
Note that you must use the first partition of the USB drive, and the partition format
must be FAT32. When there is a hidden partition, you need to delete the hidden
partition. Please use the Windows Disk Management tool to see if you have a hidden
partition.
 Step
Step 1 Enter the GUI main interface.
Step 2 Select "Settings > Other > Upgrade", check "Enable upgrade".
Step 3 Select "Upgrade from USB storage" in the "Select upgrade mode", and then
select "Save".
Step 4 Place the upgrade file in the root directory of the USB flash drive.
Step 5 Insert the USB flash drive into the USB port on the rear panel of the terminal.
Step 6 The GUI automatically pops up "current version: XXXX, new version: XXXX".
And then select "OK".
Step 7 The GUI automatically pops up "Download completed, immediately restart to
safe mode for upgrade?" and then select "OK".
Step 8 The terminal automatically shuts down and restarts, and the system starts to
upgrade.
Step 9 Upgrade completed.
Step 10 End.
 You must use the first partition of the USB flash drive, and the partition format must
be FAT32. When there is a hidden partition, you need to delete the hidden partition.
Please use the Windows Disk Management tool to see if you have a hidden
partition.
 After select "OK" in step 6, if the terminal does not automatically restart, you need
to manually restart the terminal.
Copyright © 2021 Laia · www.laiatech.com 53 All rights reserved