Local Audio Loopback; Video Input; System Message - LAIA TP-100 Administrator's Manual

Parameter
Auxiliary Stream
Bandwidth
Auxiliary Flow Rate
Auxiliary Flow Protocol
Auxiliary Stream
Resolution
Auxiliary Stream Frame
Rate
Shake
Packet Loss Rate

6.2 Local Audio Loopback

After the "Local Audio Loopback Test" is enabled, you can output the audio input of
the local end on the local audio.

6.3 Video Input

Displays the input of HDMI. When there is no external video input, "XXX: No input"
is displayed.

6.4 System Message

Display the serial number, MAC address, system version, Boot version, ARM version,
and FPGA version of the terminal.
Copyright © 2021 Laia · www.laiatech.com
How to understand
The bandwidth allocated to the secondary video.
The real-time rate of the secondary video, which will change
dynamically in real time.
The actual secondary video protocol after capacity negotiation.
The resolution of the secondary video at the current conference
The number of frames displayed by the secondary video per
second. This value changes dynamically according to the current
network environment.
The degree of change in network latency.
Network congestion can cause network packet loss. The higher the
congestion, the greater the packet loss rate.
20 All rights reserved