Usb Audio - LAIA TP-100 Administrator's Manual

Enable echo cancellation
on line in
Enable echo cancellation
on line in left channel
Enable echo cancellation
on line in right channel

8.4.5 USB Audio

 Step
Step 1 Enter the GUI main interface, select "Settings > Audio > USB Audio".
Step 2 Configure USB audio parameter information. The parameter description is
shown in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Show advanced settings
Enable USB audio in
Enable USB audio out
Mute microphone
USB phone connected
Mute HDMI-1 when USB
phone connected
Copyright © 2021 Laia · www.laiatech.com
When enabled, the terminal will echo the
audio of the linear input.
When enabled, the terminal will perform echo
cancellation processing on the audio of the
linear input left channel.
When enabled, the terminal will echo the
audio of the linear input right channel.
Description
Enable or disable display advanced settings.
After the USB audio input is enabled and the
USB port of the rear panel of the terminal is
properly connected to the USB microphone,
the remote end can receive the USB
microphone input of the local end.
After enabling the USB audio output and the
USB connector on the rear panel of the
terminal is properly connected to the USB
microphone, you can hear the far end sound
from the speaker.
After the terminal rear panel is connected to the
when
USB microphone, the analog microphone has
no audio output.
HDMI-1 does not output sound when the rear
panel is connected to a USB microphone.
37
Default: Disable
Default: Disable
Default: Disable
Setting
Default: Disable
Default: Enable
Default: Enable
Default: Enable
Default: Enable
All rights reserved