Hdmi-1/Sdi/Hdmi-2 Layout - LAIA TP-100 Administrator's Manual

Video Codecs
H.264HP, H.264, H.263+, H.263
 At least one video protocol needs to be selected to ensure that the terminal can
establish a video call.
 The terminal currently supports H.264HP, H.264, H.263+ and H.263 video
protocols.
 Both parties support H.264HP as the preferred video capability by default in the
case of H.264HP.

8.5.3 HDMI-1/SDI/HDMI-2 Layout

When you need to view a single picture or a combination of multiple video images
(such as local primary video, remote primary video, secondary video) on one display
device, you can switch the screen layout.
 Precondition
There are at least two or more image sources of the local primary video, the local
secondary video, the remote primary video, or the remote dual stream.
 Step
Step 1 Enter the GUI main interface.
Step 2 Select "Settings > Video > HDMI-1/SDI Layout" to configure the multi-screen
layout of the first output.
Step 3 Select "Settings > Video > HDMI-2 Layout" to configure the multi-screen
layout of the second output.
Step 4 Select "Save", save configuration information.
Step 5 End.
Parameter
Auto start preview when
presentation has signal
Show presentation
Copyright © 2021 Laia · www.laiatech.com
Description
Select whether to enable the preview function when the secondary
video source has a signal.
Select whether to enable the display of the auxiliary stream. If not
enabled, all layouts containing the auxiliary stream will not be
displayed.
41 All rights reserved