Contacts; Add Contact; Edit Contact - LAIA TP-100 Administrator's Manual

4

Contacts

The contact is used to store remote meeting site information. You can add, edit, and
delete existing information in the contacts. Using an address book saves you the
ability to start a meeting while avoiding entering the wrong address.

4.1 Add Contact

You can add a meeting in the contacts page.
 Step
Step 1 Enter the GUI main interface, select "Contacts"
Step 2 Select Local "Add"
Step 3 Enter the name of the meeting to be added in the "Contact" field.
Step 4 Enter the meeting number or IP address to be added in the "Address" field.
Step 5 Select the meeting site grouping in the "Groups" drop-down list box.
Step 6 Select the appropriate "Call Protocol" and "Call Rate".
Step 7 Select "OK".
Step 8 End.

4.2 Edit Contact

You can edit a meeting in the contacts page.
 Step
Step 1 Enter the GUI main interface, select "Contacts"
Step 2 Select the item to be edited in the contacts list and select "Edit".
Step 3 Edit the meeting name in the "Contact" field in the edit contact interface that
pops up.
Step 4 Edit the meeting number or IP address in the "Address" field in the edit
contact interface that pops up.
Step 5 Select the appropriate "Call Protocol" and "Call Rate".
Copyright © 2021 Laia · www.laiatech.com
.
16
.
.
All rights reserved