Subtitles; Endpoint Name; Message; Banner - LAIA TP-100 Administrator's Manual

USB Record Control
You can control the opening and closing of the USB recording and playback in the
terminal interface, and manage the recorded files, such as playing, downloading
and deleting.
USB Record Control Steps:
Step 1 Enter the GUI main interface, select "Control > Record Control".
Step 2 Enable or disable USB record functions as you needed.
Step 3 End.
The way to start the USB recording and playback is determined according to the
"Record mode" that you have configured. You must manually turn off the USB
recording and playback switch. Be careful not to directly pull out the USB flash drive
without turning off the USB recording and playback, so as to avoid recording file
corruption and Damage to the USB flash drive.

8.9 Subtitles

In the Subtitles screen, you can configure the terminal name, send a message or
banner to the remote site.

8.9.1 Endpoint Name

Configure whether the local terminal name displays subtitles, subtitle content, subtitle
color, or background color.

8.9.2 Message

Configure the message text size, text color, background color, and short message
content sent to the remote site.

8.9.3 Banner

Configure the banner text size, text color, background color, and banner content sent
to the remote site.

8.10 System

In the System screen, you can configure the terminal language, terminal date,
terminal wizard, and system reset.
Copyright © 2021 Laia · www.laiatech.com 50 All rights reserved