LAIA TP-100 Administrator's Manual page 32

 Step
Step 1 Enter the GUI main interface, select "Settings > Account > H323 Account".
Step 2 Configure H323 account parameter information. The parameters are
described in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter Description
Enable
Enable or disable H.323 function.
H.323
Select the H.323 account configuration method, the
options are:
Register
Manual: You need to manually enter the information

Mode
required for H.323 registration.
ZijingCloud: You need to enter the username and

site password of ZijingCloud.
Enable or disable register GK function, the options are:
Enable: The terminal registers with the GK server.

After the terminal is successfully registered to the GK
server, you can call other terminals through the remote
Register GK
meeting number.
Disable: The terminal does not register with the GK

server. When calling with the H.323 protocol, only other
terminals can be called by IP address.
Set the IP address or domain name of the GK server.
Gatekeeper
When set to domain name, you need to enable the DNS
server and set the correct mapping on the DNS server.
The name or alias of the terminal registered on the GK.
Site Name
After the terminal registers with the GK server, the GK
server identifies the terminal with the name.
Site number corresponding to the terminal.
Site Number
After the terminal registers with the GK server, other
terminals can use the number to call the terminal.
The password registered by the terminal to the GK server
Site
for the legality of the GK server authentication terminal.
Password
Copyright © 2021 Laia · www.laiatech.com 28
Setting
Default: Enable
Default: Manual
Default: Disable
No default value
No default value
No default value
No default value
All rights reserved