Sip Cryptos; Protocol; H323 - LAIA TP-100 Administrator's Manual

Parameter
H.235.6 AES-256
H.235.6 AES-128
Clear Text

8.6.3 SIP Cryptos

 Step
Step 1 Enter the GUI main interface, select "Settings > Security > SIP Cryptos".
Step 2 Configure SIP cryptos parameter information. The parameters are described
in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
SRTP: AES-128
& SHA1-80
Clear Text

8.7 Protocol

You can configure terminal H323 or SIP protocol registration information as needed.

8.7.1 H323

 Step
Step 1 Enter the GUI main interface, select "Settings > Protocol > H323".
Step 2 Configure H323 parameter information. The parameters are described in the
following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Enable call IP address
when registered
Copyright © 2021 Laia · www.laiatech.com
Description
Enable or disable H.235.6 AES-256.
Enable or disable H235.6 AES-128.
Select whether to enable Clear Text.
Description
Select whether to enable SRTP: AES-128 &
SHA1-80
Select whether to enable Clear Text.
Description
Select whether to allow the terminal to
register the IP address directly in the
H323 state.
44
Setting
Default: Disable
Default: Enable
Default: Enable
Setting
Default: Enable
Default: Enable
Setting
Default: Enable
All rights reserved