Set Camera Parameters; Record Control; Main Video Source; Conference Lock - LAIA TP-100 Administrator's Manual

7.2.3 Set Camera Parameters

Step 1 Enter the GUI main interface.
Step 2 Select "Control > Camera Control > Camera Parameters > Set".
Step 3 Set camera parameters such as image parameters, backlight settings, and
blink mode.
Step 4 View the set image effects on the display device.
Step 5 End.

7.3 Record Control

Control the recording and playback, and choose whether to enable USB recording,
remote recording or RTMP.

7.4 Main Video Source

Control the main video source, select HDMI, SDI or DVI as the main video source,
and the secondary video source defaults to DVI.

7.5 Conference Lock

Control the lock on the conference and choose whether to enable the conference
lock feature.

7.6 Video Layout

Control the screen layout to set the HDMI-1/SDI or HDMI-2 screen.

7.7 Power Control

Control the terminal power supply to select whether to shut down, restart, or
standby/wake up the conference terminal.
Copyright © 2021 Laia · www.laiatech.com 23 All rights reserved