Audio Output - LAIA TP-100 Administrator's Manual

Parameter
Enable Line In right channel
Mute Line In when
transmitting presentation
Set Mic Power On

8.4.2 Audio Output

 Step
Step 1 Enter the GUI main interface, select "Settings > Audio > Audio Output".
Step 2 Configure audio output parameter information. The parameter description is
shown in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Audio output digital gain
Show advanced settings
Enable HDMI-1 audio out
Enable Line Out
Enable tone
Copyright © 2021 Laia · www.laiatech.com
Description
Enable right channel capture for linear input
When this option is enabled, the linear input
is automatically muted when the dual stream
not is not sent; when the dual stream is sent, the
linear input is automatically sent to the far
end and simultaneously output from the local.
Choose whether to turn on the microphone
power.
Description
Adjust the audio output digital gain.
Enable or disable show advanced settings.
When the HDMI-1 audio output is enabled and
the rear panel HDMI-OUT1 is connected to the
TV, you can hear the far-end audio output from
the TV.
After the linear output is enabled and the "AUDIO
OUT" connector on the rear panel of the terminal
is properly connected to the speaker, you can
hear the far end sound from the speaker.
Enable or disable the output ring tone. When
enabled, you can hear the ring tone of the far end
from the local.
34
Setting
Default: Enable
Default: Disable
Default: Enable
Setting
Default: 10
Default: Disable
Default: Enable
Default: Enable
Default: Enable
All rights reserved