E1 (Optional) - LAIA TP-100 Administrator's Manual

Parameter
Keep alive mode
Keep alive interval
Enable compact mode
to encode large packet
Enable BFCP control
Client prefer for BFCP
Enable UDP listener
UDP listener port
Enable TCP listener
TCP listener port

8.7.3 E1 (optional)

E1 (combined 30 voice channels and 2 control channels on a 2.048 Mbit/s high-speed
channel using synchronous time division multiplexing). Only 2U device support this
function. When using E1 for communication, you need to configure the E1 parameter.
 Step
Step 1 Enter the GUI main interface, select "Settings > Protocol > E1".
Step 2 Configure E1 parameter information. The parameters are described in the
following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter Description
Configure the terminal working clock, the options
are:
E1 work clock


Copyright © 2021 Laia · www.laiatech.com
Description
Select SIP keep alive mode, the options
are:
No Keep Alive

By CRLF

By OPTION

Configure the SIP keep alive interval
Choose whether to encode very long
messages in compact mode
Select whether to enable BFCP control
Select whether client prefer for BFCP
Select whether to enable UDP listener
Configure UDP listener port
Select whether to enable TCP listener
Configure TCP listener port
Local: Local clock
Remote: Remote clock
46
Setting
Default: By OPTION
Default: 30
Default: Disable
Default: Enable
Default: Enable
Default: Enable
Default: 5060
Default: Enable
Default: 5060
Setting
Default: Remote
All rights reserved