LAIA TP-100 Administrator's Manual page 52

Parameter Description
Record server Configure the address of the recording server.
address The remote recording uses the H.323
protocol. The address is an H.323 address,
such as 3212@192.168.1.240.
Video Select what you want to record:

source of the terminal, generally the camera
input.

terminal.
Auto start once Enable auto start once conferencing, after the
conferencing terminal is in the conference, the remote
recording
opened to deliver the recorded content to the
remote recording server. The recording will be
automatically terminated after the conference,
without additional intervention.
 Recording protocol is RTMP parameter list
Parameter Description
RTMP Server Configure the RTMP Server Address.
Address
Bit rate Configure the RTMP push Bit rate.
Audio Configure the RTMP push stream audio
source, the options are:


Video Configure the RTMP push stream video
source, the options are:


Start mode Configure the RTMP push stream start mode,
the options are:



Copyright © 2021 Laia · www.laiatech.com
Main Video Source: The main video
HDMI-OUT1: The first output of the
function will
Local
Local and remote
Main Video Source
HDMI-OUT1
Auto start once power on
Auto start once conferencing
Manual start
48
Setting
Default: Null
Default: HDMI-OUT1
Default: Disable
be automatically
Setting
Default: Null
Default: 768 kbps
Default: Local and remote
Default: Main Video Source
Default: Manual start
All rights reserved