Call; Call Options - LAIA TP-100 Administrator's Manual

8.3 Call

Configure call options (automatically answer, automatically reject calls when the
password is wrong, etc.).

8.3.1 Call Options

Configure whether to enable automatic answering, automatically reject incoming calls
when the password is incorrect, and preempt the auxiliary stream and other
parameter information.
 Step
Step 1 Enter the GUI main interface, select "Settings > Call > Call Options".
Step 2 Configure call options parameter information. The parameter description is
shown in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Automatically answer
incoming calls
Automatically refuse
incoming calls when
password not match
Presentation
contended
Enable far end
camera control
Copyright © 2021 Laia · www.laiatech.com
Description
There are two ways for terminal to answer a call:
Disable automatically answer incoming calls:

When a call is received, a request window is
popped up to prompt the user to accept the
request.
Enable automatically answer incoming calls:

When the local site is not in the conference, all
incoming calls are automatically answered.
When enabled, you need to set the "incoming
password". When the remote end calls the local
end, you need to add the ##** password after the
number. If the password is not included or the
password is incorrect, the local end will
automatically reject the incoming call.
After the preemptive auxiliary stream is enabled,
the remote end can also send dual streams if the
local end sends dual streams.
When enabled, it will support the control of the
remote camera or the remote control of the local
camera.
31
Setting
Default: Enable
Default: Disable
Default: Enable
Default: Enable
All rights reserved