Sip Account - LAIA TP-100 Administrator's Manual

8.2.2 SIP Account

When using the SIP (Session Initiation Protocol) protocol for video communication,
you need to configure SIP parameters, such as whether to register a SIP server.
 Step
Step 1 Enter the GUI main interface, select "Settings > Account > SIP Account".
Step 2 Configure SIP parameters. The parameters are described in the following
table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter Description
Enable SIP Enable or disable SIP function.
Select the SIP account configuration method, the
options are:

Register Mode
information required for SIP registration.

and site password of ZijingCloud.
Enable or disable register SIP function, the options
are:

server. After the terminal is successfully registered
Register SIP
to the SIP server, you can call other terminals
through the remote meeting number.

the SIP server. When calling with the SIP protocol,
only other terminals can be called by IP address.
Transport Select Transport Protocol, the options are TCP,
Protocol UDP, TLS and Auto.
Enter the IP address or domain name of the SIP
proxy server. This must be enabled when the user's
Proxy Server
network environment requires that the proxy server
be enabled.
Username Enter the username used to register the SIP server. No default value
Copyright © 2021 Laia · www.laiatech.com
Manual: You need to manually enter the
ZijingCloud: You need to enter the username
Enable: The terminal registers with the SIP
Disable: The terminal does not register with
29
Setting
Default: Enable
Default: Manual
Default: Disable
Default: TCP
No default value
All rights reserved