Reset; Other; Upgrade - LAIA TP-100 Administrator's Manual

Step 4 Configure other platforms, select whether to enable the "ZijingCloud" platform,
and enter the "ZijingCloud" user name and password as needed, and then go
to "Next".
Step 5 Configure terminal name, and then go to "Next".
Step 6 Configure H323, select whether to enable H323, and configure
corresponding parameters as required, then go to "Next".
Step 7 Configure SIP, select whether to enable SIP, and configure
corresponding parameters as required, then go to "Next".
Step 8 Select "Save", save configuration information.
Step 9 End.
You can choose Back to return to modify the configuration, or you can choose Exit to
abandon the setup wizard.

8.10.3 Reset

You can choose whether to reset the terminal to factory settings as needed.
 Step
Step 1 Enter the GUI main interface, select "Settings > System > Reset".
Step 2 Select "Reset to factory settings".
Step 3 Select "Save", save configuration information.
Step 4 End.
After restoring the factory settings, all the terminal parameters you configured earlier
will be lost, please be careful settings!

8.11 Other

In the Other screen, you can configure terminal upgrade, terminal power and terminal
log information.

8.11.1 Upgrade

The terminal currently supports two upgrade methods: network upgrade and USB
flash drive upgrade.
Copyright © 2021 Laia · www.laiatech.com 52 All rights reserved