Audio; Audio Input - LAIA TP-100 Administrator's Manual

8.4 Audio

Configure parameter information such as audio input, audio output, stereo, echo
cancellation, USB audio and audio capabilities.

8.4.1 Audio Input

 Step
Step 1 Enter the GUI main interface, select "Settings > Audio > Audio Input".
Step 2 Configure audio input parameter information. The parameter description is
shown in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Input Volume
Enable Microphone 1
Microphone digital gain
Enable Microphone 2
Microphone 2 digital gain
Enable Line In
Line In digital gain
Enable Line In left channel
Copyright © 2021 Laia · www.laiatech.com
Description
Control input total volume
After the microphone input is enabled and the
MIC1 interface on the rear panel of the
terminal is properly connected to the
microphone, the remote end can receive the
microphone input of the local end.
Adjust the microphone 1 digital gain
After the microphone input is enabled and the
MIC2 interface on the rear panel of the
terminal is properly connected to the
microphone, the remote end can receive the
microphone input of the local end.
Adjust the microphone 2 digital gain
After the linear input is enabled and the
"AUDIO IN" connector on the rear panel of
the terminal is properly connected to the
audio linear input, the far end can receive the
linear input of the local end.
Adjust the line in digital gain.
Enable left channel acquisition for linear
input
33
Setting
Default: 10
Default: Enable
Default: 8
Default: Enable
Default: 8
Default: Enable
Default: 8
Default: Enable
All rights reserved