Settings; Network; Ipv4 - LAIA TP-100 Administrator's Manual

8

Settings

8.1 Network

According to the network deployment of the terminal, network configuration of the
terminal enables the terminal to communicate normally with other devices.

8.1.1 IPv4

Before using Ethernet for video communication, you must pre-configure the Ethernet
parameters of the terminal, such as IP address, subnet mask, and gateway address.
 Step
Step 1 Enter the GUI main interface, select "Settings > Network > IPv4".
Step 2 Set network parameters such as IP address, gateway and subnet mask etc.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter Description
Configure the network working mode, the options are:



Work Mode





address through a DHCP server.
Connection

Type
assigned by the network administrator. You need to set
the IP address, netmask, gateway, and DNS address.
IP address Configure the IP address of the terminal.
Netmask Configure the subnet mask of the terminal.
Copyright © 2021 Laia · www.laiatech.com
Auto
10M Full Duplex
10M Half Duplex
100M Full Duplex
100M Half Duplex
1000M Full Duplex
1000M Half Duplex
DHCP: The terminal automatically obtains an IP
Static IP: The IP address of the terminal is
24
Setting
Default: Auto
Default: DHCP
Default: actual needs
Default: actual needs
All rights reserved