Vpn; Account - LAIA TP-100 Administrator's Manual

Parameter
Type of Service
(TOS)
Use a maximum jitter
buffer of
Enable RTP loss
recovery

8.1.4 VPN

Configure the P2P VPN mode and choose whether to enable the central VPN client
function.
 Step
Step 1 Enter the GUI main interface, select "Settings > Network > VPN".
Step 2 Configure VPN parameter information. The parameters are described in the
following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
P2P VPN Mode
Enable Center VPN
Client

8.2 Account

Configure the H323 account, SIP account, and terminal display name.
8.2.1 H.323 Account
When using the H.323 protocol for video communication, you need to configure an
H.323 account, such as whether to register the GK, GK address, registration name,
and so on.
Copyright © 2021 Laia · www.laiatech.com
Description
Configuring IP Service Type (TOS) values
Configure the maximum jitter buffer value
Select whether to enable RTP packet loss
recovery
Description
Configure the P2P VPN mode, the options are
Off

Server

Client

Choose whether to enable center VPN client
27
Setting
Default: 184
Default: 500
Default: Disabled
Setting
Default: Off
Default: Disable
All rights reserved