Date; Guide - LAIA TP-100 Administrator's Manual

8.10.1 Date

You can configure whether the system automatically obtains the network time and
system date whether the 24-hour format is enabled.
 Step
Step 1 Enter the GUI main interface, select "Settings > System > Date".
Step 2 Configure date parameter information. The parameters are described in the
following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Automatic date time
Set date
Set time
NTP Server
Select time zone
Enable 24-hour format
Select date format

8.10.2 Guide

The installation wizard will start automatically after the terminal is powered on for the
first time. You can also start the installation wizard through the GUI setup menu to
complete the basic setup.
 Step
Step 1 Enter the GUI main interface.
Step 2 Select "Settings > System > Guide" to enter the wizard settings page.
Step 3 After configuring the network, selecting the network work mode and IP get
method, go to "Next".
Copyright © 2021 Laia · www.laiatech.com
Description
Enable "Automatic date &
indicate the time provided
network.
Set the date to take effect when disable
"Automatic date time".
Set the time to take effect when disable
"Automatic date time".
Set the NTP time server.
Select the time zone of your region.
Enable or disable the 24-hour format.
Select the order in which the date,
month, and day formats are displayed.
51
Setting
time" to Default: Enable
by the
Default: Disable
Default: Disable
Default: Enable
Default: GMT+08:00
Default: Disable
Default: Month-Day-Year
All rights reserved