Display Name - LAIA TP-100 Administrator's Manual

Parameter Description
Authentication
Enter the username used for authentication.
Username
Authentication Enter the domain name used by the SIP server to
Realm identify the corresponding domain.
Enter the password of the SIP server to be used by
the terminal to authenticate the terminal of the SIP
Authentication
server. When the SIP server is authenticated, the
Password
password set by the terminal must be the same as
the password set in advance on the SIP server.
After you enable the terminal to register the SIP server, you need to configure the
"Proxy Server", "Username" and "Authentication Realm".

8.2.3 Display Name

Configure the terminal display name, H.323 display name encode and decode mode.
 Step
Step 1 Enter the GUI main interface, select "Settings > Account > Display Name".
Step 2 Configure the display name parameter. The parameter description is shown
in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Endpoint Name
Encode H.323 display
name as
Decode H.323 display
name as
Copyright © 2021 Laia · www.laiatech.com
Description
Configure terminal display name
Configure the H.323 display name encoding
method. The options are:
Unicode

GBK

Configure the H.323 display name decoding
mode. The options are:
Auto

Unicode

GBK

30
Setting
No default value
No default value
No default value
Setting
Default: T1
Default: Unicode
Default: Auto
All rights reserved