LAIA TP-100 Administrator's Manual page 36

Parameter
Enable lookup from
DNS SRV record
Default call type
Default call rate
Transmit Bandwidth
Receive Bandwidth
Presentation
bandwidth percent
Primary video mode
Presentation video
mode
Seconds waiting for
media
Throttle of Intra
Frame Request
Copyright © 2021 Laia · www.laiatech.com
Description
When enabled, the domain name will be queried
for DNS SRV records.
Terminal default call type, the options are
H.323/SIP/Auto.
Terminal default call
bandwidth settings can affect the quality of video
communications or
unsuccessful.
Upstream bandwidth limit. Regardless of the call
rate, the actual transmission rate does not exceed
the transmission bandwidth.
Downstream bandwidth limit. Regardless of the
call rate, the actual receive rate does not exceed
the receive bandwidth.
The proportion of bandwidth allocated for the
secondary stream when the secondary stream is
sent.
Select the appropriate format based on the
primary video protocol you have set.
Clear: Priority is given to image resolution.

Smooth: Priority is given to the frame rate.

Much Smooth: Priority is given to the frame

rate.
Select the appropriate format based on the demo
video protocol you have set.
Clear: Priority is given to image resolution.

Smooth: Priority is given to the frame rate.

Set the seconds waiting for media
Set the throttle of intra frame request
32
rate. Improper call
cause calls to be
All rights reserved
Setting
Default: Enable
Default: Auto
Default: 1920 kbps
Default: 8000 kbps
Default: 8000 kbps
Default: 30%
Default:
Much Smooth
Default: Clear
Default: 60s
Default: 0 seconds