Diagnostic; Call Information - LAIA TP-100 Administrator's Manual

6

Diagnostic

6.1 Call Information

After the meeting starts, you can go to the "Diagnostic > Call Information" page to get
a real-time view of the quality of the meeting.
 Precondition
The real-time parameters of the meeting can only be displayed after the meeting
has started.
 Step
Step 1 Enter the GUI main interface, select "Diagnostic > Call Information".
Step 2 View terminal call information. The parameter description is shown in the
following table.
Step 3 End.
Parameter
Whether to Encrypt
Call Bandwidth
Audio Protocol
Audio Rate
Primary Video Bandwidth
Primary Video Rate
Master Video Protocol
Primary Video Resolution
Primary Video Frame
Rate
Copyright © 2021 Laia · www.laiatech.com
How to understand
Enable or disable encryption.
Actual call bandwidth after negotiation.
The actual audio protocol after the capability negotiation.
The bandwidth allocated to the audio.
The bandwidth allocated to the primary video.
The real-time rate of the main video, which changes dynamically
in real time.
The actual primary video protocol after capability negotiation.
The resolution of the main video at the current conference.
The number of frames displayed per second by the main video,
which varies dynamically based on
environment.
19
the current network
All rights reserved