Audio Codecs; Video; Video Output - LAIA TP-100 Administrator's Manual

8.4.6 Audio Codecs

 Step
Step 1 Enter the GUI main interface, select "Settings > Audio > Audio Codecs".
Step 2 Configure audio codecs parameter information. The parameters are
described in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Audio Codecs
AACLD 128K, G.722.1C 48K, G.722.1C 24K, AACLD 64K, AACLD 56K, AACLD 48K, SILK 8K,
SILK 16K, G.722, G.711 µ-Law, G.711 A-Law, G.726 40K, G.726 32K, G.726 24K, G.722.1 32K,
G.722.1 24K, AACLD 96K, G.726 16K, Opus 8K, Opus 16K, Opus 48K
 At least one audio protocol needs to be selected to ensure that the terminal can
establish a voice call.
 The terminal currently supports audio protocols such as G.722.1C, AAC LC, SILK,
G.722, G.711 μ, G.711 A, G.726, and G.722.1.
 In the case where both parties support G722.1C, G722.1C is selected as the
preferred audio capability by default.

8.5 Video

Configure video output, video capabilities, HDMI-1/SDI or HDMI-2 to achieve the
desired video image.

8.5.1 Video Output

The terminal has three video output connectors: HDMI OUT1, HDMI OUT 2 and
SDI OUT.
Interface Name Interface Type
HDMI OUT 1 HDMI
HDMI OUT 2 HDMI
SDI OUT SDI
Copyright © 2021 Laia · www.laiatech.com
Default Description after Power On
The default is "main output port".
The default primary video is displayed when there is no
secondary video, and the secondary video is displayed
when there is secondary video.
SDI OUT and HDMI OUT1 output the same video source.
38 All rights reserved