System Security; H323 Cryptos - LAIA TP-100 Administrator's Manual

8.6.1 System Security

 Step
Step 1 Enter the GUI main interface, select "Settings > Security > System Security".
Step 2 Configure system security parameter information. The parameters are
described in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Enable HTTP Service Access the terminal WEB interface or API
Enable
HTTPS Service
HTTP Authentication
Password
Enable SSH Service
SSH Password
Enable
Admin Password

8.6.2 H323 Cryptos

 Step
Step 1 Enter the GUI main interface, select "Settings > Security > H323 Cryptos".
Step 2 Configure H323 cryptos parameter information. The parameters are
described in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Copyright © 2021 Laia · www.laiatech.com
Description
without encryption.
Access the terminal WEB interface or API in
encrypted mode.
Access the password of the terminal WEB
interface through HTTP and HTTPS. The
HTTP and HTTPS access user names are
fixed to admin.
The SSH protocol encrypts the data
transmission between the two parties. After
the SSH service is enabled, you can log in to
the terminal remotely.
The password to be entered when accessing
the terminal through SSH. The SSH access
user name is fixed to admin.
Choose whether to enable the administrator
password
43
Setting
Default: Enable
Default: Enable
Default: admin
Default: Enable
Default: admin
Default: Disable
Default Password: admin
All rights reserved