Table of Contents
Advertisement
Step 16: Attach Ground Stakes
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE ON LEVEL GROUND
A: Drive 2 (0318) Ground Stakes 10-1/2" into the ground at the 2 (1771) Posts on (1770) SW Ground as shown
in fig.16.1. Attach using 2 (S3) #8 x 2-1/2" Wood Screws per ground stake. (fig. 16.1)
WARNING:
injury, stakes must be driven 10-1/2" into ground.
Digging or driving stakes can be dangerous if you do not
check first for underground wiring, cables or gas lines.
Wood Parts
2 x
Ground Stake 1 1/4 x 1 1/2 x 14"
0318
To prevent tipping and avoid potential
0318
S3
Fig. 16.1
1771
S3
1770
Hardware
4 x
#8 x 2-1/2" Wood Screw
S3
30
Floor boards were
removed for clarity
1771
0318
Advertisement
Table of Contents
