Table 1-93 Residual Image Or Ghosting - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RAP 1-69
Residual Image or Ghosting
Fig 1-24 Residual Image or Ghosting
.

Table 1-93 Residual Image or Ghosting

Step Actions and Questions
1 CUSTOMER USAGE INSPECTION
Inspect the residual images.
Was the customer printing numerous copies of
the same image?
2 Generate a print run of 30 pages of varying
images.
Do residual images still appear?
LASER PRINT (EP) CARTRIDGE
3
REPLACEMENT
Install a new Laser Print (EP) Cartridge.
Are the ghost images gone?
FUSER INSPECTION
4
1. Generate ten Grid Pattern Test Prints and switch OFF
printer power when the last print is halfway through the
Fuser.
2. Carefully remove the Laser Print (EP) Cartridge and
inspect the toner image on the print before it enters the
Fuser and immediately after it exits the Fuser.
Is the image on the paper normal before it
enters the Fuser, but there are ghost images on
the paper when it exits the Fuser?
PROBLEM
There are faint, ghostly image appearing randomly on the
page. The images may be images from a previous page.
THE PRINTER DISPLAYS NO ERROR CODE.
S4525-15
Volume 1 / Print Engine - Troubleshooting
Yes No
Go to step 2 Go to step 3
Go to step 3 Problem
solved. Avoid
printing
numerous
copies of the
same image.
Problem Go to step 4
solved
Replace the Replace the
Fuser Bias Transfer
Assembly Roller
Assembly
1-131