General Specifications
RAM and printer capabilities
®
The DocuPrint
N4525 Network Laser Printer is equipped with 32 MB of RAM and is
expandable as shown below. Adding additional RAM:
Improves system performance
Improves processing of complex jobs
Enables increased graphics at higher resolutions.
Also, adding Flash Memory (non-volatile memory) in the Flash DIMM slot enables
downloading and storing fonts, forms, and macros.
Memory Expansion
The base printer contains 32 MB of DRAM installed as a standard. Three option slots are
provided on the System Controller Board to accommodate DIMMs per the Memory
Expansion Options table below. The maximum DRAM memory, both on-board and added
via DIMMs is 192 MB. Memory added beyond this limit is ignored.
Additional memory provides the following enhanced printer capabilities:
Additional font cache
Additional download space for fonts, macros and images
Increased throughput for complex pages, duplex pages and larger paper sizes
(A3/Ledger)
Increased PostScript VM (volatile memory)
Collated sets without the Hard Disk Drive.
You can essentially increase the resident fonts of the printer or create resident macros by
installing Flash DIMMs and downloading resources permanently to this memory.
The printer features three DIMM slots (J4, J5, and J6) for memory expansion. DRAM
DIMMs can be installed in any of these slots. Refer to the instructions packed with the
DIMMs.
If flash memory is to be used, this 8-Mbyte Flash DIMM should be installed in the slot
labeled J6 (Bootable RAM).
Table 1-1 Memory Expansion Options
Memory Upgrades:
16-Mbyte DIMM
32-Mbyte DIMM
64-Mbyte DIMM
8-Mbyte Flash DIMM
1-14
DocuPrint N4525 Network Laser Printer - Service Guide
Part Number
097S02356
097S02357
097S02358
097S02360