Table 1-100 Lead Edge Registration Is Not Correct
Step
Actions and Questions
6
The following printer components and areas are
associated with this specific problem. One or more of
these components or areas may have failed partially or
completely. If you cannot isolate this problem using the
steps in this Fault Isolation Procedure, replace each
component or troubleshoot each area listed below, one at
a time, until you isolate and solve the problem.
Registration Sensor (PL 6.1.7)
Registration Clutch (RRP 1-41)
System Controller Board (RRP 1-73)
Input/Output Board (RRP 1-70).
1-144
DocuPrint N4525 Network Laser Printer - Service Guide
Yes
No