Print Engine Controller Test Prints; Table 1-103 Print Engine Controller Test Prints - Xerox DOCUPRINT N4525 Service Quick Reference Manual

Print Engine Controller Test Prints

The Print Engine Controller Board Test Prints require entering Diagnostics Mode. Refer
to page 1-154 for instructions on how to enter Diagnostics Mode.
The Control Panel Test Legend to the right will aid in
navigating through the variety of test prints available.

Table 1-103 Print Engine Controller Test Prints

Press [1] or [5] to display: Þ Main Menu
Press [2] or [6] to display: ß Press [3] or [7] to display: ß
Test Print
Start Print
Test Print
Print Quantity
Test Print
Input Tray
Test Print
Output Tray
Test Print
Duplex
Test Print
Staple Selection
Volume 1 / Print Engine - Diagnostics, Tests & NVRAM
Print Menu
Print Quantity
1*
Input Tray
Tray 1*
Input Tray
Tray 2
Input Tray
(1)
Tray 3
Input Tray
(1)
Tray 4
Input Tray
(1)
Tray 5
Input Tray
(4)
MBF/ENV
Output Tray
Face Down*
Output Tray
Face Dw F Offset
Output Tray
Face Dw R Offset
Output Tray
(2)
Face up
Output Tray
(3)
Finisher
Duplex
Off*
Duplex
On
Staple Selection
(3)
No Staple*
Staple Selection
(3)
Front Staple
Menu Up
Item Up
Stop
Menu
Item
Start
Down
Down
Comment
Press [4] to start the test print
selected. Press [0] to stop.
Press [3] or [7] until desired
quantity is selected (1~999),
then press [4].
Press [4] to select the paper
feed tray desired.
Press [4] to select the paper
feed tray desired.
Press [4] to select the paper
feed tray desired.
Press [4] to select the paper
feed tray desired.
Press [4] to select the paper
feed tray desired.
Multi-sheet Bypass Feeder or
Envelope Feeder
Press [4] to select the output
Tray desired.
This selection outputs to the
Face Down output Tray using
no offset.
Outputs to the Face Down
output Tray using front offset
Outputs to the Face Down
output Tray using rear offset
Outputs to the Face up tray
Outputs to the Finisher
Single side printing
Both sides of page printed
o
45 relative to the front
(Control Panel side) of the
printer
Value Up
Value
Down
1-155