Residual Image Or Ghosting - Xerox Phaser 6125 Service Manual

Print-Quality Troubleshooting

Residual Image or Ghosting

5-46
There are faint, ghostly images appearing on the page. The images may be
either from a previous page or from the page currently being printed.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Erase LED Assy (PL4.1.8)
Imaging Unit (PL4.1.21)
Fuser (PL6.1.1)
Transfer Unit (PL6.1.7)
IP Board (PL8.1.9)
MCU Board (PL8.2.13)
LVPS Harness Assy (PL9.1.3)
Warning
To prevent burns, allow the Fuser to cool down before starting the
procedure.
Troubleshooting Procedure Table
Step Actions and Questions
Did the client print a large number of
1
the same image?
2 Run the Contamination Check test
print:
Contamination Chk
Is the image printed correctly?
Example Print
Service Mode > Test Print >
Phaser 6125/6130 Color Laser Printer Service Manual
ABCDE abcde 12345
ABCDE abcde 12345
Yes No
Go to step 2. Go to step 3.
Complete Go to step 3.
s6180-326