Physical Dimensions; Table 1-2 Physical Dimensions; Table 1-3 Printer Clearances - Xerox DOCUPRINT N4525 Service Quick Reference Manual

Physical Dimensions

Table 1-2 Physical Dimensions

Dimensions
Height
Width
Depth
Weight (110 V model)
Weight (220 V model)
Above measurements taken with the Multi-sheet Bypass Feeder
Note
(MBF) retracted.

Table 1-3 Printer Clearances

Clearances
Front
Back
Right
Left
Top
Bottom
Mounting surface flatness
Above minimum space requirements are measured from the
Note
printer covers to the wall or neighboring object.
Specification
486 mm / 19.1 inches +/- 1%
645 mm / 25.4 inches +/- 1%
540 mm / 21.3 inches +/- 1%
48.5 Kg / 106.92 Lbs. +/- 1% (65.0 Kg / 143.3 Lbs. packaged for
shipment)
53.0 Kg / 116.85 Lbs. +/- 1% (69.5 Kg / 153.22 Lbs. packaged for
shipment)
Specification
460 mm / 18.1 inches
200 mm / 7.9 inches for ventilation
200 mm / 7.9 inches without Finisher
1000 mm / 39.4 inches with Finisher
364 mm / 14.3 inches without Duplex Unit installed.
640 mm / 25.2 inches with Duplex Unit installed.
Typically 762 mm / 30 inches
No obstruction under printer that could block cooling vents
Within 2 degrees of horizontal with all four feet in contact with the
table surface
Volume 1 / Print Engine - General Information 1-15