Xerox DOCUPRINT N4525 Service Quick Reference Manual page 150

Table 1-91 Spot Deletions (cont'd.)
Step Actions and Questions
4 FUSER INSPECTION
1. Generate another Black Test Print and switch OFF
printer power when the print is halfway through the
Fuser.
2. Open the Left Upper Door.
3. Examine the paper areas before the image enters the
Fuser and after the image exits the Fuser.
Is the image on the paper normal before it
enters the Fuser, but there are spot deletions
visible when it exits the Fuser?
1-128 DocuPrint N4525 Network Laser Printer - Service Guide
Yes No
Replace the Replace the
Fuser paper with
Assembly fresh, dry
paper and
thoroughly
clean the
inside of the
printer.