Xerox DOCUPRINT N4525 Service Quick Reference Manual page 3

Users safety summary
Terms in manual: Various terms are used throughout this manual to either
provide additional information on a specific topic or to warn of possible danger
that might be present during a procedure or action. Be aware of all symbols and
terms when they are used, and always read
messages.
NOTE : A NOTE may indicate an operating or maintenance
CAUTION : A CAUTION indicates an operating or maintenance
WARNING : A WARNING indicates an operating, or maintenance
Terms on product:
CAUTION: A personal injury hazard exists that may not be apparent.
DANGER: A personal injury hazard exists in the area where you see
Power source: For 110 VAC printers, Do not apply more than 130 volts RMS
between the supply conductors or between either supply conductor and ground.
Use only the specified power cord and connector. For 220 VAC printers, do not
apply more than 250 volts RMS between the supply conductors or between
either supply conductor and ground. Use only the specified power cord and
connector. Refer to a qualified service technician for changes to the cord or
connector.
WARNING: If the product loses the ground connection, usage of knobs and
controls (and other conductive parts) can cause an electrical shock.
procedure, practice or condition that is necessary to
efficiently accomplish a task.
NOTE may also provide additional information related to
A
a specific subject or add a comment on the results achieved
through a previous action.
procedure, practice or condition that, if not strictly
observed, could result in damage to, or destruction of,
equipment.
procedure, practice or condition that, if not strictly
observed, could result in injury or loss of life.
For example, a panel may cover the hazardous area.
the sign.
NOTE , CAUTION and WARNING