Table of Contents
Advertisement
B-8
Figure B-8. Throttle Limits are found on the Setup tab.
2. Maximum Joystick Throttle (Forward)
a. Slowly increase throttle until the engine reaches approximately
1800 RPM.
b. Enter the throttle percentage in Port Max Forward Throttle.
3. Maximum Throttle at Idle (Reverse)
a. Put the port engine in reverse gear.
b. Very slowly increase throttle and note the maximum throttle
percentage at which the engine is still at idle.
c. Enter the value in Port Idle Reverse Throttle.
4. Maximum Joystick Throttle (Reverse)
a. Slowly increase throttle until the engine reaches the maximum
desired RPM for joystick operation. This will be either:
i. the maximum throttle just before cavitation, or
ii. if cavitation does not occur, the maximum throttle for
comfortable use.
b. Enter the throttle percentage in the Port Max Reverse Throttle
field. Write down the corresponding RPM in the
adjacent table – you will use it in STEP 3.
c. Return the engine to neutral.
5. Repeat the preceding steps for the starboard engine. On a quad-
engine vessel you will also need to set the throttle limits for the port
center and starboard center engines. Be sure you are entering the
throttle percentages in the correct boxes.
6. Click Write to save the values.
RPM @ Maximum joystick throttle in reverse
Port
Port Center
Table B-1.
Starboard
Starboard Center
EN
Advertisement
Table of Contents
