Table of Contents
Advertisement
EN
Figure 7-16. Harness connection to EST gateway.
7.2.3
Yamaha EX EST gateway and Optimus 360 connection
The Yamaha EX shift and throttle system connects to the Optimus 360
system through the EST Gateway, using the harness CM20046. The
gateway in turn connects to the Optimus 360 CAN1 and CAN2 networks,
and the Yamaha Command Link Plus network.
NOTE
Figure 7-17 shows the interconnections for a single station implementation.
In twin station applications, a joystick may only be installed at the main
station. Although figure 7-17 shows a twin engine configuration, the
Optimus and gateway connections are identical for a triple engine boat.
You may need to add additional Command Link Plus hubs if there is no
port available to connect the gateway harness. Refer to the Yamaha
documentation for part numbers.
CABLE TIE
GATEWAY HARNESS
PART NO. CM20046
CM20046
HARNESS
CABLE TIE
7-15
Advertisement
Table of Contents
