Table of Contents
Advertisement
Figure B-4. Joystick Setup tab.
EN
B.3 Joystick tuning procedure
The joystick setup procedure is organized into ten steps, detailed in the
following sections. You will perform the majority of the procedure from the
Setup tab (and its three sub-tabs) of the joystick's Datalink interface.
NOTICE!
The joystick tuning procedure will require maneuvering of the boat. Some of
these procedures can be performed at dock with the boat securely restrained,
but others will require open water with adequate maneuvering space.
B-5
Advertisement
Table of Contents
