Table of Contents
Advertisement
4-2
2. Press > to enter the Select System Type menu.
Figure 4-2.
3. Select Optimus 360 then press Save or
Setup menu. When you set the system type the CANtrak automatically
configures the menus to show only items that relate to your system.
4. Choose Select Shift & Throttle Type and press >. Choose the appro-
priate option from the list and press
5. Choose Select Number of Devices and press >. The devices you
see in this list may not match the figure. The available selections will
change based on the system type you specified previously.
Figure 4-3.
6. Use the + and – buttons to change the quantity of each device to
match your system. Press Save or
System Setup menu.
7. Review section 11.0 in Book 65 and determine if your system software
needs to be updated.
to return to the System
to return to the previous menu.
when finished to return to the
EN
Advertisement
Table of Contents
