EN
8. Multiple helm stations only: choose Select Device Locations from
the System Setup menu and press >. The display will list the installed
components along with their serial numbers. Check the serial numbers
and use the + and – buttons to toggle the components between Main
and Second station. Press Save to return to the System Setup menu.
4.2 Purge and calibrate
You are now ready purge and calibrate your steering system. Refer to the
Optimus EPS Installation Manual (Book 65) for instructions. Be sure to
perform the steering installation checks described in Book 65. The steering
portion of the system should now be fully functional.
4.3 Engine-specific setup
Before you are ready to Sea Trial the steering system and set up the joystick,
you will need to perform some engine-specific setup activities. You will
find these in the section related to the engines you are using.
4-3