Pressure Relief Kit; Fluid Check Valve; 40 Column Thermal Printer - Graco Horizon Fluid Management Systems Instructions Manual

Horizon System Components

Pressure Relief Kit

Part No. 207221, Pressure Relief Kit
900 psi (6.2 MPa, 62 bar) Maximum Working Pressure
For installation at the pump; see page 104. Relieves
fluid line pressure when the pressure exceeds 900 psi
(6.2 MPa, 62 bar).
NOTE: Order Part No. 102527 Pressure Relief Valve
for installation at the check valve to vent thermal
expansion pressure. See page 106.
102527
Pressure/Thermal Relief Kit

Fluid Check Valve

Part No. 111620, Check Valve
1500 psi (10.3 MPa, 103 bar) Maximum Working
Pressure
1/2 npt(fbe), Not Shown
80 308607

40 Column Thermal Printer

Part No. 113774, Thermal Printer
Order power supply and paper separately. See below.
Part No. 514037, Printer Paper
Printer Replacement Paper, 1 roll
Printer Power Supply
Part No.
114442
114443
114444
Old Style Printer
Printer
The Horizon system printer can print out individual job
01326 tickets after each dispense transaction is completed. It
uses a roll of thermal paper and prints a 40-column-
width ticket, similar to a cash register receipt. These
dispense reports can be torn off immediately (for
attachment to an invoice, for instance) or saved for
later analysis. The printer is connected to the Master
Control Module by a 25 or 50 ft. (7.6 or 15.3 m) 22
AWG shielded cable. See page 78.
Description
120 VAC
230 VAC
100 VAC
New Style Printer